ClearCut

500ml: 80000Ks

1L: 150000Ks

4L: 550000Ks

CARPRO ClearCut provides exceptional cut in very little time whilst creating a minuscule amount of dust.

While its cutting capabilities are extraordinary, the finish can also surprise you. With the capability of removing scratches as deep as P1000 CARPRO ClearCut is the perfect tool for a 2-step job on any paint or even 1-step on many med-to-hard paintworks.

  • EXTREMELY FAST CUT
  • NO WAX, FILLERS, OR SILICONE
  • BODY SHOP SAFE
Buy Now From

HOW TO USE

FOR D/A
  1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of ClearCut.
  2. Spread product across a section.
  3. Raise speed to MED/HIGH.
  4. Use MIN pressure for first 2-3 passes and increase with each pass.
  5. When scratches disappear or the polish becomes clear, wipe clean with a MF towel.
  6. Clean pad.
  7. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
FOR ROTARY
  1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of ClearCut.
  2. Spread product across a section.
  3. Keep polisher on LOW speed with LOW pressure.
  4. Use MIN pressure for first 1-2 passes increasing pressure ever so slightly. Work with max 1000-1200 RPM.
  5. When scratches disappear or the polish becomes clear, wipe clean with a MF towel.
  6. Clean pad.
  7. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.